Home > Led Driver > Tlc59731

Tlc59731

Contents

DatasheetDownload A6281 datasheet Quote Find where to buy Quote Features, Applications 3-Channel Constant Current LED Driver with Programmable PWM Control × 10-bit PWM brightness settings × 7-bit dot This BiCMOS device includes an On/Off shift register, a Dot Correction A6282 16-Channel Constant-Current LED DriverThe A6282 device is designed for LED display applications. ACS715 provides economical and precise ACS714 A1171 Micropower Ultrasensitive Hall Effect SwitchThe A1171 integrated circuit is an ultrasensitive, Hall effect switch with latched digital outputs and either unipolar or omnipolar magnetic The maximum current is set by an external resistor.

Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com Latched Registers 800 kHz Clock OEI REXT VIN VREG To PWM Counters Current Regulator 0 Regulator To logic OUT1 The LED brightness is controlled by performing PWM control on the outputs. The A6281 controls LED brightness with a Pulse Width Modulation (PWM) scheme that gives the application the capability of displaying a billion colors in an RGB cluster. Related products with the same datasheet A6281EESTR-T MM1779 MM3285 Some Part number from the same manufacture Allegro Micro Systems, Inc. http://www.ti.com/lit/gpn/tlc5973

Tlc59731

The A6281 is supplied in a 3 mm × 3 mm 16-terminal QFN (suffix ‘ES’) package, with 0.75 mm nominal overall height. The brightness data of the PWM signal for each LED is stored in three 10-bit registers. Electronic components database Search Circuit SectionSupplierDatasheet Search Log in Toggle navigation Digchip Search datasheet Buy / Find supplier Parametric Search New parts / circuits Cross reference Application notes Others

It features A6285 16-Channel Constant-Current Latched LED Driver With Open LED Detection And Dot CorrectionThe A6285 is designed for LED display applications. It features operation at low supply currents and voltages, A3290 Chopper Stabilized, Precision Hall Effect Latches For Consumer And Industrial ApplicationsThe A3290 and A3291 Hall effect latches are extremely temperature-stable and This CMOS device includes an input shift register, accompanying data latches, and 16 MOS constant current A3930 Automotive Three Phase BLDC Controller And MOSFET DriverThe A3930 and A3931 are 3-phase brushless Ws2812 The maximum current is set by an external resistor.

Each of these inputs is buffered to drive the next chip in the chain. Tlc5973 Arduino Also, VIN can be tied to the LED voltage supply Clock Data Latch Output Enable Microprocessor VIN OutR OutG OutB Clock In Clock Out Data In Data Out Latch In Latch The A6281 is designed to minimize the number of components needed to drive LEDs with large pixel spacing. Functional drawing of daisy chained display application.

The brightness data of the PWM signal for each LED is stored in three 10-bit registers. Ws2812b A large number of A6281s can be daisy chained together and controlled by just four control signals (clock, serial data, latch, and output enable). Description (continued) bus, thus eliminating the need for a separate chip supply bus or an Architectural lighting external regulator. A large number of A6281s can be daisy chained together and controlled by just four control signals (clock, serial data, latch, and output enable).

Tlc5973 Arduino

They incorporate much of the circuitry A4930 Single Phase Fan Pre-DriverDesigned for pulse width modulated (PWM) current control of single phase brushless fans, the A4930 minimizes external component count and integrates CompanyAllegro Micro Systems, Inc. Tlc59731 The remaining bits are used for the data. Ws2801 Ic All the internal latched registers are loaded by a 32-bit shift register.

The peak value for each LED can be adjusted (dot-corrected) to compensate for mismatch, aging, and temperature effects. Additional pixel boards with A6281 ICs can be applied. All the internal latched registers are loaded a 32-bit shift register. The LED brightness is controlled by performing PWM control on the outputs. Worldsemi

Also, VIN can be tied to the LED voltage supply bus, thus eliminating the need for a separate chip supply bus or an external regulator. The peak value for each LED can be adjusted (dot-corrected) to compensate for mismatch, aging, and temperature effects. The remaining bits are used for the data. One address bit controls whether dot correction/clock divider ratio or brightness data is loaded into the registers.

The package is lead (Pb) free with 100% matte-tin leadframe plating. Rgb Led Driver The A6281 controls LED brightness with a Pulse Width Modulation (PWM) scheme that gives the application the capability of displaying a billion colors in an RGB cluster. One address bit controls whether dot correction/clock divider ratio or brightness data is loaded into the registers.

The A6281 is designed to minimize the number of components needed to drive LEDs with large pixel spacing.

High intensity monochrome displays Large video and graphic displays Applications include: Colored, large-character LED signs Scrolling, colored marquees Selection Guide Part Number A6281EESTR-T Packing* 1500 pieces/reel Mounting 16 terminal QFN The A6281EESTR-T 3-Channel Constant Current LED Driver With Programmable PWM ControlThe A6281 is a 3-channel constant current LED driver that has a wide range of output currents. Each of these inputs is buffered to drive the next chip in the chain. Digikey Characteristic Load Supply Voltage Output Voltage Output Current Ground Current VREG Pin Logic Outputs Logic Input Voltage Range Operating Ambient Temperature Maximum Junction Temperature Storage Temperature Symbol VIN VOUT IOUT IGND

The A6281 controls LED brightness with ACS715 Automotive Grade, Fully Integrated, Hall Effect-Based Linear Current Sensor With 2.1 KVRMS Voltage Isolation And A Low-Resistance Current ConductorThe Allegro??